|
|
Lock type Ball Valve
This lockable stainless steel ball valve is a specialized lock-controlled flow-regulating valve engineered for piping systems. A handle integrated with a locking mechanism. Effectively preventing unauthorized operation and misadjustment. Thereby ensuring the operational safety of the entire pipeline system. It is ideally suited for medium and low-pressure fluid systems in industrial, chemical, and similar demanding applications.
|
|
|
Water Pressure Reducing Valve This brass water pressure-reducing valve is a dedicated pressure-stabilizing device engineered for water supply systems. A top-mounted adjustment screw allows manual setting of the target pressure, making it adaptable to the pressure requirements of diverse water-use scenarios. As a critical protective core component, it safeguards the entire water supply system.
|
|
|
Brass Pre-filtration Water Filter
The brass pre-filter, designed for installation in the main water pipeline, provides initial rough filtration for the household water supply system. It can remove large particulate suspensions and insoluble impurities in the water supply, such as dirt, sediment, dust, sand grains, and sludge. It has a pressure gauge to monitor water pressure. It also has a drain valve with a red handle, so it is easy to clean and flush the collected impurities.
|
|
|
Radiator Valves for Towel Rail
This chrome-plated brass radiator valve for towel rails is a specialized temperature control fitting engineered for electric and plumbing towel rack systems. Crafted from chrome-plated brass, its core function is to control the on/off flow of fluid to the towel rack. A rotating handle enables easy opening and closing of the valve, regulating the flow of hot water or heating medium into the rack. Ideal for both electric and hydronic towel rack setups, it allows precise adjustment of the towel rack’s temperature.
|
|
|
Manual Forged Brass Radiator Control Valve
This manually operated forged brass angle radiator valve has a 90° angled body. The top-mounted white knob allows for easy rotation to adjust the valve opening, manually regulating the hot water flow into the radiator and enabling precise control of room temperature. Commonly used in traditional heating systems.
|
|
|
Angle Antique Thermostatic Radiator Valve This antique-style thermostatic radiator valve has a 90° angled body made from brass. It features a textured sensor head on top that responds to room temperature. It automatically adjusts the valve opening according to the ambient temperature. Both practical and decorative, it works well in radiator heating systems where appearance and temperature control are equally important.
|
RV Water Pressure Regulator
Parameters of RV Water Pressure Regulator
Water Pressure Regulator for RV
This RV water pressure regulator is designed to control and protect water pressure in RV water systems. It has two ports. One end connects to the RV water inlet. The other links to an external or filtered water source. Inside, the regulator cuts down the incoming high water pressure. A green knob on top allows users to adjust the outlet pressure manually, enabling it to match the needs of various RV water appliances.
- Model No.: JX-0982
- Size: 3/4″
- Material: Lead-free brass
- Finish: Natural brass
- Medium: Water
- Use: Garden, RV
- ACS, ISO9001, NF
- Connection NPT
- Max temperature: 80℃
- Working pressure: 40-50psi
- Automatically adjust
- The impurities in the water are intercepted by the filter
- Compatible with all campers, RVs, and travel trailers with a standard Garden Hose Thread female water inlet.
1. How to choose an RV water pressure regulator?
When selecting an RV water pressure regulator, choose an adjustable brass model with an in-built pressure gauge. This type gives decent control and durability. This valve adjusts to the recommended pressure of your RV. The recommended pressures are normally within 40 to 50 PSI. The valve has a good flow rate. They don’t constrict the volume of water. You prefer models that have an integrated filter. They filter out sediment and prevent blockages in your RV’s water supply system.
From Miller’s RV
2. Can you provide an MTC report for the RV water pressure regulator?
Plumberstar provides complete, official MTC reports for RV Water Pressure Regulators. These reports work for foreign trade customs clearance and quality checks. They meet the needs of overseas customers, distributors, and engineering projects for quality tracking and material compliance.
Our MTC reports cover full supply chain quality information. They clearly show product model, batch number, production date, and order details. Every batch can be traced easily.
The report lists the brass material brand used in the main body. It includes full chemical composition data. It highlights key data like lead content. This proves the product is lead-free and safe for drinking water systems. It meets strict plumbing health standards in North America and the EU.
The report also includes raw material mechanical properties. It shows finished product test results: pressure regulation accuracy, tightness, and pressure resistance. It fully proves the product’s material reliability and performance.
We issue one separate MTC report for each shipment batch. The report matches the actual goods exactly and is completely valid.
We can send a stamped paper copy with the goods. We can also send a PDF version before shipment. This helps you with customer approval, customs clearance, and warehouse checks.
If you need more documents for quality audits, such as material certificates, pressure test reports, or local certification files, we can provide them together. This gives you full compliance support for product quality.
3. What is the difference between a pressure regulator and a pressure relief valve?
An RV water pressure regulator stabilizes pressure. A pressure relief valve provides safety protection. They are completely different in function, how they work, and where they are used.
The main job of the pressure regulator is to lower and steady the incoming water pressure. It takes high pressure from campsites or city supplies — normally 40–80PSI —and keeps it in a safe range for RV pipes, usually 40–50PSI.
Even when incoming pressure changes, the output pressure stays steady. It protects the RV water pump, pipes, connectors, and water tank from high-pressure damage. It runs nonstop and adjusts pressure automatically. It is also a core product in Plumberstar’s RV series.
A pressure relief valve does not help with normal pressure control. It only opens quickly to release water when pressure goes over a safe limit. It closes again once pressure drops.
Its job is to stop pipes or tanks from bursting under too much pressure. It acts as emergency protection. It cannot stabilize pressure. It is usually installed on closed containers like water heaters and storage tanks for safety.
4. Can the RV water pressure regulator meet cross-border shipping needs?
Plumberstar RV Water Pressure Regulator is perfect for cross-border shipping.
The main body is made of food-grade lead-free brass. It is safe for drinking water systems. It has passed hygiene tests in many countries.
Sea shipping can be harsh — lots of bumps and humidity. We use multi-layer protective packaging.
- For inner packaging: Each product is wrapped in anti-static PE film. The interface has a plastic cover to prevent scratches and dust. Thick pearl cotton or foam holds it tightly in place. This stops shaking and collision inside the box.
- The outer packaging is a five-layer thick corrugated carton. It is strong, pressure-resistant, and anti-fall. It has clear product info, moisture-proof, and anti-fall warnings. It also has the Plumberstar logo.
For large orders, we reinforce whole pallets: We use fumigated solid wood or plywood pallets. We wrap them with 3 layers of high-strength stretch film. We add plastic corner protectors to stop damage.
5. Can you provide samples of the RV water pressure regulator?
Of course, Plumberstar can provide you with RV Water Pressure Regulator samples. This lets you test the product before bulk ordering. You can check pressure accuracy, material quality, interface fit, and actual use effect.
We usually have ready samples with standard specs and common pressure settings. These samples are identical to the bulk products in terms of materials, workmanship, and structure. If the samples pass your test, you can be sure bulk orders will have stable quality.
If you have specific pressure, interface, or certification needs, we will try our best to find the right sample for you. We can also make custom samples if you need.
Samples come with individual protective packaging. Threaded parts have protective caps to avoid damage during transport.
Normally, samples are free. You only need to pay the express fee. For custom samples, we charge a reasonable fee. When your formal order reaches the agreed quantity,we can deduct or refund this fee as we agree.
6. Can our logo be added to the RV water pressure regulator?
Yes, Plumberstar can add your exclusive brand logo or trademark to the RV Water Pressure Regulator.
We use laser engraving to print your logo. You can choose to put it on the flat end of the valve body or the side of the regulator main body. The logo is clear and sticks well. It won’t wear off or fall off, even with long use and transport. It also looks neat and professional.
If you have specific requirements for font, size, or layout, we can make it exactly as your design shows. Every product will have the logo in the same position and size. It looks good overall. It won’t affect the product’s strength, sealing, or pressure regulation.
For bulk orders, we also offer OEM services. This includes custom packaging, instruction manuals, and product model labels. You get full brand customization — from the product to the packaging. You can sell or supply the goods right after receiving them.
We keep your logo designs and brand info strictly confidential. We won’t share them with third parties. We fully protect your exclusive brand rights.
Just confirm your logo format and order quantity. We will arrange production smoothly. Your branded RV water pressure regulators will meet your needs for quality, appearance, and delivery time.
7. Can RV regulators support long-term distribution agreements?
Yes, Plumberstar fully supports long-term distribution agreements for RV Water Pressure Regulators. This is our main cooperation model for overseas agents, wholesalers, and brand customers.
We offer stable and strong support policies to partners with long-term agreements. This helps both sides achieve steady win-win results.
On pricing, we provide tiered discounts based on your annual purchase volume. We also offer annual price protection. This avoids frequent price changes from raw material swings. Your operating costs will be more predictable.
On supply, we reserve production capacity and lock raw material stocks for you first. This prevents stockouts or delays during peak seasons, holidays, or urgent orders. It supports your regional sales and channel development reliably.
Plumberstar is ready to build long-term regional distribution partnerships. We aim to grow the market together and achieve stable, long-term returns.
