|
|
Multi-Outlet Distribution Manifold
The multi-outlet distribution manifold is an important part at the end of a circulating water system. It is used to send water accurately to different pipes and collect water returning from the system. It can also adjust the total water flow flexibly according to the needs of different heating products, helping the system work efficiently and keeping water evenly balanced in all branches.
|
|
|
Stainless Steel Hydraulic Balance Water Separator
The stainless steel hydraulic balance water separator is used to distribute and collect water in a circulating system. It can also control the water flow in each branch with its built-in structure. This helps keep all heating or cooling terminals balanced and prevents some areas from being too hot or too cold. It is commonly used in floor heating, central air conditioning, and other heating and cooling pipeline systems.
|
|
|
Mixing Tank Manifold for Heating System
It can separate the work of the heat pump and the boiler pump so they do not affect each other. It helps organize and standardize how a multi-boiler system works. This not only improves the system’s overall efficiency but also allows the boiler to work at full power. It can also provide practical supporting services such as temperature control.
|
|
|
Manifold Automatic Exhaust Valve
A manifold automatic exhaust valve is a valve installed in a pipeline. Its job is to automatically release air that builds up in the pipes. This helps prevent air blockages, water hammer, lower heating or cooling efficiency, and equipment damage caused by trapped air. It can monitor and release air while water or other fluids are flowing, without needing anyone to operate it.
|
|
|
Square Pumping Station Pipe
A square pumping station pipeline is a kind of square-section pipeline component applied in a pumping station system. Compared with round pipes, its square shape makes it easier to arrange and install in pumping stations with limited space. It can connect the pump body, water tank, valve, and other equipment in the pumping station. It is often used for pipeline connections and system expansion in heating and water supply pumping stations.
|
|
|
Circular Pumping Station Pipeline
The circular pumping station pipeline is an important part of the pumping station system. It has a round shape and is mainly used to carry and guide water or other fluids in heating and water supply systems. Its round design allows fluid to flow smoothly, can handle high pressure, and is strong against compression and impact. This extension pipe increases the distance between system parts, which is especially useful when the system layout needs to be changed or adjusted.
|
Nickel Plated Brass Manifold For Water System
Parameters of Nickel Plated Brass Manifold For Water System
A nickel-plated brass manifold for a water system is a special part used to send and collect water in pipes. It has many openings, so water can go to or come from different parts of the main pipe. When used with valves, it can control each branch separately, turning water on or off and changing the flow. This manifold helps keep the water flow balanced, makes the system work better, and improves control accuracy.
- Model No: JX-10055
- Material: CW617N Brass
- Inlet Hole Thread (Female): 3/4″ and 1″, two options
- Adapter size: Ø16×1.5/1/2×1.5
- Center distance is 50mm
- 2 loops-12 loops
-
Shape: Throughflow with straight branches
- Finishing: Nickel-plated
- Standards: EN331 standards for the European
- Thread Type: BSP
- Pressure Applicable≤ 1.2MPa
- Teflon tape and pipe dope are friendly
- Application: Heating system
- Maximum working pressure: 10 bar
- Maximum Working Temperature: + 105ºC
- ODM/OEM support
- Free samples available
1. What systems does the nickel-plated brass manifold work with?
Plumberstar nickel-plated brass manifold has a wide range of adaptability and can be accurately applied to heating, domestic hot water, central air conditioning, water circulation, and industrial fluid delivery systems to cover multiple scenarios. For customers ‘special working conditions, interface specifications, and other personalized demands, we will provide professional customized solutions, and the whole process of technical docking to ensure that the products fit the actual application.
From Giacomini Video Projects
2. Can the center-to-center spacing of the brass manifold be customized?
Plumberstar’s nickel-plated brass manifold fully supports custom center-to-center spacing. We can adjust the distance between each port freely. It depends on your project needs, pipeline layout, on-site space, and equipment matching.
We have professional mold and processing capabilities. We can redesign hole positions and center distances. We just need your drawings, size data, or on-site installation requirements. This makes sure the manifold lines line up correctly when installed. Spacing is reasonable. Pipe connection and later maintenance are easier.
You can choose a larger spacing. It helps install insulation sleeves, valves, and filters. You can also choose a smaller spacing. It fits narrow spaces. We can do custom production while keeping structural strength and safety.
Custom products still use high-standard nickel-plated brass. Every finished manifold goes through pressure testing. Quality is stable and reliable.
3. What logistics methods are supported for the manifold?
Plumberstar’s nickel-plated brass manifold supports many kinds of logistics and shipping methods. We cover both domestic projects and global exports.
We choose the best transport way for you. It depends on order quantity, delivery time, and destination country. We control logistics costs and keep high efficiency.
- In international trade, sea freight is the most common and cost-effective. We provide FCL and LCL shipping. It fits medium and large orders. Goods can go to major ports around the world. We can arrange delivery to port or door-to-door, including DDU and DDP. It helps you finish customs clearance and receive goods easily.
- If you need fast delivery, you can choose air freight. It suits samples, urgent orders, or small high-value goods. Transport time is usually 3–7 days. It helps you finish project delivery or market testing quickly.
- For very small batches or samples, we use international express. Such as DHL, UPS, FedEx, TNT. Customs clearance is simple, and shipping is fast.
- We pack manifolds professionally for long-distance transport. We use cartons with foam or wooden frames. It protects against collision, moisture, and oxidation.
- We also provide full export documents. Including customs declaration, commercial invoice, packing list, and certificate of origin. We can offer double clearance and tax-inclusive service. It simplifies your import process. You can check the logistics track in real time during shipping. We also update the transport progress for you.
According to order quantity, country, and time needs, we make the best logistics plan for you and offer detailed quotes. We balance cost, speed, and safety in the best way.
4. How long is the warranty period for the manifold?
3 years from the date when the customer signs for the goods. If there is a non-artificial quality issue within the warranty scope, such as coating peeling, valve body cracking, seal leakage, etc., the customer should provide photos or videos of the affected products and order information; we will provide solutions within 3 working days.
5. Can accessories be pre-installed on the manifold in the factory?
Plumberstar’s nickel-plated brass manifold supports full factory pre-installation of accessories.
Before shipping, we can pre-assemble and test all kinds of parts for you. These include automatic air vents, drain valves, blowdown valves, flow control valves, thermostatic heads, brackets, filters, union joints, pressure gauges, plugs, and lock valves. All assembly, sealing tests, and full inspections are finished in the factory.
You can install and use the product directly after receiving it. No need to assemble parts on site. This saves a lot of construction time. It also reduces the risk of missing or wrong installation. It improves the tightness and stability of the whole system.
We follow your configuration list or drawings for pre-installation strictly. All pre-installed parts match the manifold perfectly. We run full pressure and air-tightness tests before delivery. Every connection and accessory is reliable and qualified.
For customers who need export and full-container standardized shipping,pre-assembled manifolds can be packed uniformly. It saves space and lowers transport damage. It also makes customs clearance easier, and you can send goods straight to the project site.
You only need to provide the accessory list and requirements. Plumberstar will finish the full pre-installation, testing, and packaging. We provide one-stop finished product delivery. You can install it right after arrival — efficient and worry-free.
6. Can you provide the free samples of the brass manifold?
Plumberstar can provide samples of nickel-plated brass manifolds. You can use them for product testing, project acceptance, customer demos, or quality checks.
You only need to pay the international express shipping cost. We will arrange fast delivery.
If you need custom samples, we will charge a reasonable fee. When your later formal order reaches the agreed amount, we can deduct the sample fee from the bulk payment.
For long-term customers, large project customers, or clients with repeated order plans, we offer better sample support. We do our best to reduce your early testing costs.
This makes sure you get real samples with the same quality as bulk products. It also avoids wasting sample resources. Cooperation between both sides will be more practical and long-term.
7. Can OEM/ODM customization be accepted for the manifold?
Yes, Plumberstar is a professional valve manufacturer. We fully support OEM and ODM customization for nickel-plated brass manifolds.
- For OEM customization, we can produce based on your existing styles, drawings, sizes, and technical parameters. This includes branch number, center distance, interface specs, length, flow structure, and pressure level. We mass-produce strictly according to your requirements. We ensure product performance and appearance are consistent.
- For ODM customization, we provide one-stop design and development. We can design structure, function, appearance, and packaging for you. It depends on your usage scene, market needs, and installation habits. For example, we can change the flow structure, add flow control, improve appearance, design special brackets, and match full sets of accessories. We help you make unique and competitive products.
- We also support brand customization. This includes laser engraving, screen printing your logo, custom packaging, manuals, labels, colors, and coatings. All details can follow your brand requirements.
We have mature systems for mold development, production, and testing. We ensure stable quality and on-time delivery for customized products. We strictly protect your design and intellectual property rights.
